Car Keys We Cut and Program

All Keys Lost

The situation we deal with the most is when all of the keys are gone. We create a new key from your vehicle's own data and program it in the car, allowing a vehicle that has never run before to start again on the same visit.

Transponder Chip Keys

The blade is cut to fit your locks, and the chip inside is paired with your immobilizer. Both steps occur within the vehicle, which is why a hardware store copy will open the door but never start the engine.

Push to Start Proximity Fobs

There is no blade to cut, but the programming takes the longer half of the job. We connect a new proximity fob to your vehicle so that the car recognizes it on approach and the start button works again.

Remote Head Keys

Blade and buttons are one piece. We cut the blade, programd the chip, and paired the remote so that locking, unlocking, and starting all require a single key.

Spare Key Duplication

Made while you still have a working key, which is the cheapest car key you will ever buy. Worth doing before the only key you own goes missing.

Broken Key Extraction

Snapped in the door or the ignition, we remove the piece without damaging the lock and cut a replacement on the spot.

Request a Service

Vehicles We Make Keys For

Most makes on the road here

We cover the large majority of domestic, Japanese and Korean vehicles, from the earliest transponder systems through current push to start models. Ford, Chevrolet, Toyota, Honda, Nissan, Hyundai, Kia, Jeep, Ram, Dodge, Subaru and Mazda among them.

The exceptions, told to you first

A few situations need dealer equipment. Some European makes use proprietary systems, and a handful of manufacturers lock programming to the dealer for the first year or two of a new model. We check your year and make when you call, so you hear it on the phone rather than in your driveway.

Request a Service

How a Car Key Replacement Visit Works

1

Call with your year, make and model

Those three things tell us which key your car takes and what equipment needs to come out. Have the VIN if it is handy, though we can read it off the windshield when we arrive.

2

We confirm the price and what to have ready

You get the price and the list of documents before anyone is dispatched. If your paperwork is locked inside the car, say so on the phone and we will sort it out.

3

We come to the vehicle

Driveway, parking lot, roadside, workplace or storage yard. The car does not move and nothing gets towed.

4

You start the car before we leave

The key is cut, programmed and tested in your hand. If you want the old keys cleared from the system, this is when that happens.

Request a Service

Why Venice Drivers Call Us for Car Keys

No tow and no dealer appointment

Your car stays where it is. We bring the cutting and programming equipment to the vehicle, so there is no flatbed and no waiting for a service department to fit you in.

The price before we set off

You get the number on the phone once we know your year, make and model. Not an estimate that changes when the technician sees the car.

We check your vehicle before dispatch

A few makes need dealer only equipment. We tell you that on the phone instead of driving out, charging you, and leaving you in the same spot you started.

Old keys can be cleared

If yours were lost or stolen, ask us to erase the previous keys when we program the new one. On most vehicles only the key in your hand will start the car afterward.

Ownership checked every time

Photo identification and paperwork linking you to the vehicle, without exception. The rule that slows you down by two minutes is the one that stops anyone else driving off in your car.

You test the key before we pack up

We do not leave on a key that has not been proven. The job is finished when the engine runs and the doors lock.

Get a Free Quote

Frequently Asked Questions

Can you replace a key if I only have the broken half?

Yes, and having it usually helps. A broken key still carries the cut pattern, which gives us a reference alongside your vehicle's own data. If the other half snapped off inside the ignition or the door, we remove it before cutting the new key.

Do I need to be there while you make the key?

Yes. The owner, or someone you have authorized with us beforehand, needs to be present with photo identification and paperwork for the vehicle. That check is what protects your car, so it is not something we skip.

Can you make a second key during the same visit?

Yes, and it is the cheapest moment to do it. The equipment is already connected to your car, so adding a spare while we are there costs far less than booking a separate visit later.

My key turns but the remote buttons do not work. Is that a new key?

Usually not. That is normally the remote side on its own, which often comes down to the fob battery or the remote needing to be paired again. Tell us what the key does and does not do and we will tell you which one you are looking at.

Do you replace keys for work vans and fleet vehicles?

Yes. Commercial vans and trucks use the same transponder and proximity systems as passenger vehicles. If you run several vehicles, we can make matching spares across them in one visit.

Is a locksmith key the same as a dealer key?

Functionally yes. It is cut to your vehicle and programmed to its immobilizer, so it locks, unlocks and starts exactly the way the original did. The difference is where it is made and what it costs.

Need a Car Key Made in Venice?

Tell us your year, make and model and we will give you the price and come to the vehicle. Venice, Nokomis, Osprey, North Port and Englewood, seven days a week.